Atlantis Online
March 29, 2024, 07:22:59 am
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Has the Location of the Center City of Atlantis Been Identified?
http://www.mysterious-america.net/hasatlantisbeenf.html
 
  Home Help Arcade Gallery Links Staff List Calendar Login Register  

Building the World Trade Center

Pages: 1 [2]   Go Down
  Print  
Author Topic: Building the World Trade Center  (Read 452 times)
0 Members and 32 Guests are viewing this topic.
Jeannette Latoria
Superhero Member
******
Posts: 5791



« Reply #15 on: September 11, 2007, 01:18:40 pm »

« Last Edit: September 11, 2007, 01:22:07 pm by Jeannette Latoria » Report Spam   Logged

Jeannette Latoria
Superhero Member
******
Posts: 5791



« Reply #16 on: September 11, 2007, 01:19:37 pm »

The large, column-free space between the perimeter and core was bridged by prefabricated floor trusses. The floors supported their own weight, as well as live loads, provided lateral stability to the exterior walls, and distributed wind loads among the exterior walls. The floors consisted of 4 inch (10 cm) thick lightweight concrete slabs laid on a fluted steel deck. A grid of lightweight bridging trusses and main trusses supported the floors. The trusses had a span of 60 feet (18.2 m) in the long-span areas and 35 feet (11 m) in the short span area. The trusses connected to the perimeter at alternate columns, and were on 6 foot 8 inch (2.03 m) centers. The top chords of the trusses were bolted to seats welded to the spandrels on the exterior side and a channel welded to the core columns on the interior side. The floors were connected to the perimeter spandrel plates with viscoelastic dampers, which helped reduce the amount of sway felt by building occupants. The trusses supported a 4 inch thick (10 cm) lightweight concrete floor slab, with shear connections for composite action.

Hat trusses (or "outrigger truss") located from the 107th floor to the top of the buildings were designed to support a tall communication antenna on top of each building. Only 1 WTC (north tower) actually had an antenna fitted, which was added in 1978. The truss system consisted of six trusses along the long axis of the core and four along the short axis. This truss system allowed some load redistribution between the perimeter and core columns and supported the transmission tower.

Report Spam   Logged

Jeannette Latoria
Superhero Member
******
Posts: 5791



« Reply #17 on: September 11, 2007, 01:21:01 pm »



Typical WTC architectural floor plan
Report Spam   Logged

Jeannette Latoria
Superhero Member
******
Posts: 5791



« Reply #18 on: September 11, 2007, 01:23:25 pm »



Schematic of composite floor truss system.
Report Spam   Logged

Jeannette Latoria
Superhero Member
******
Posts: 5791



« Reply #19 on: September 11, 2007, 01:24:51 pm »

Report Spam   Logged

Jeannette Latoria
Superhero Member
******
Posts: 5791



« Reply #20 on: September 11, 2007, 01:26:01 pm »

Wind effects

The tube frame design using steel core and perimeter columns protected with sprayed-on fire resistant material created a relatively lightweight structure that would sway more in response to the wind, compared to traditional structures such as the Empire State Building that have thick, heavy masonry for fireproofing of steel structural elements. During the design process, wind tunnel tests were done at Colorado State University and at the National Physical Laboratory in the U.K. to establish design wind pressures that the World Trade Center towers could be subjected to and structural response to those forces. Experiments also were done to evaluate how much sway occupants could tolerate. Subjects were recruited for "free eye exams," while the real purpose of the experiment was to subject them to simulated building sway and find out how much they could comfortably tolerate. Many subjects did not respond well, experiencing dizziness and other ill effects. The chief engineer Leslie Robertson worked with Canadian engineer Alan G. Davenport to develop viscoelastic dampers to absorb some of the sway. These viscoelastic dampers, used throughout the structures at the joints between floor trusses and perimeter columns, along with some other structural modifications reduced the building sway to an acceptable level.
Report Spam   Logged

Jeannette Latoria
Superhero Member
******
Posts: 5791



« Reply #21 on: September 11, 2007, 01:27:21 pm »

Fire protection

Sprayed-fire resistant materials (SFRMs) were used to protect some structural steel elements in the towers, including all floor trusses and beams. Gypsum wallboard in combination with SFRMs, or in some cases gypsum wallboard alone, was used to protect core columns. Vermiculite plaster was used on the interior-side and SFRMs on the other three sides of the perimeter columns for fire protection. The 1968 New York City building codes were more lenient in some aspects of fire protection, such as allowing three exit stairwells in the World Trade Center towers, instead of six as required under older building codes.

The 1968 New York City building codes did not require sprinklers for high-rise buildings, except for underground spaces. In accordance with building codes, sprinklers were originally installed only in the underground parking structures of the World Trade Center. Following a major fire in February 1975, the Port Authority decided to start installing sprinklers throughout the buildings. By 1993, nearly all of Tower 2 [South Tower] and 85 percent of Tower 1 had sprinklers installed, and the entire complex was retrofitted by 2001.
Report Spam   Logged

Jeannette Latoria
Superhero Member
******
Posts: 5791



« Reply #22 on: September 11, 2007, 01:28:15 pm »



World Trade Center in 1973
Report Spam   Logged

Jeannette Latoria
Superhero Member
******
Posts: 5791



« Reply #23 on: September 11, 2007, 01:33:51 pm »

Construction

In March 1965, the Port Authority began acquiring property at the World Trade Center site. The Ajax Wrecking and Lumber Corporation was hired for the demolition work, which began on March 21, 1966 to clear the site for construction of the World Trade Center.

Groundbreaking was on August 5, 1966, marking the beginning of construction of the World Trade Center's foundations. The site of the World Trade Center was located on landfill, with the bedrock located 65 feet (20 m) below. In order to construct the World Trade Center, it was necessary to build the "bathtub", with the slurry wall along the West Street side of the site, to keep water from the Hudson River out. This method was used in place of conventional dewatering methods because lowering the groundwater table would cause large settlements of nearby buildings not built on deep foundations. The slurry method involves digging a trench, and as excavation proceeds, filling the space with a "slurry" mixture, composed of bentonite which plugs holes and keeps water out. When the trench was dug out, a steel cage was inserted, with concrete poured in, forcing the "slurry" out. The "slurry" method was devised by Port Authority chief engineer John M. Kyle, Jr. Towards the end of 1966, work began on building the slurry wall, led by Montreal-based Icanda, a subsidiary of an Italian engineering firm, Impresa Costruzioni Opere Specializzate (I.C.O.S.). It took fourteen months for the slurry wall to be completed, which was necessary before excavation of material from the interior of the site could begin. The original Hudson Tubes, which carried PATH trains into Hudson Terminal, remained in service as elevated tunnels until 1971 when a new PATH station was built.

Construction work began on the North Tower in August 1968 with construction beginning on the South Tower by January 1969. In January 1967, $74 million in contracts were awarded to the Pacific Car and Foundry Company, Laclede Steel Company, Granite City Steel Company, and Karl Koch Erecting Company to supply steel for the project. The Port Authority chose to use many different steel suppliers, bidding on smaller portions of steel, rather than buy larger amounts from a single source such as Bethlehem Steel or U.S. Steel as a cost-saving measure. Karl Koch was also hired to do all the work of erecting the steel, and a contract for work on the aluminum facade was awarded to the Aluminum Company of America. Tishman Realty & Construction was hired in February 1967 to oversee construction of the project.

Extensive use of prefabricated parts for the perimeter framing and floor truss systems helped speed up the construction process and reduce costs, while providing greater quality control. Steel components were freighted into a Penn Central yard in Jersey City. From there, they were brought in early morning hours through the Holland Tunnel to the construction site, and lifted into place by a crane. Larger pieces were brought to the construction site by tugboats. A special type of crane, suitable for constructing such tall buildings, that used hydraulics to lift components and provided its own power was used in construction of the World Trade Center. The Favco Standard 2700 Crane, manufactured by Favelle Mort Ltd. of New South Wales, Australia was informally called a "kangaroo crane".

In 1970, tugboat workers went on strike, halting the transport of material to the construction site. The Port Authority attempted other means of transporting material, including via helicopter. When this method was tried, the helicopter lost its load of steel into the Kill Van Kull. Some other mishaps occurred during the construction process, including disruption of telephone service in Lower Manhattan when telephone cables were crushed by pile drivers. On March 16, 1970, a propane gas explosion injured six workers when a truck hit a propane tank. In all, 60 workers were killed in construction accidents while the World Trade Center was being built.

Construction of 1 World Trade Center (North Tower) was completed on December 23, 1970, with 2 World Trade Center (South Tower) completed on July 19, 1971. The first tenants moved into the North Tower in December 1970, and into the South Tower in January 1972.[84] The buildings were dedicated on April 4, 1973; Tobin, who had resigned the year before, was absent from the ceremonies.

Building the World Trade Center involved excavating 1.2 million cubic yards (917,000 m³) of material. Rather than transporting this material at great costs out to sea or to landfills in New Jersey, the fill material was used to expand the Manhattan shoreline across West Street. Work to demolish the piers began on January 5, 1967, including Pier 7 to Pier 11 which were all constructed around 1910. The demolition work moved forward, despite conflicts between David Rockefeller, Governor Nelson Rockefeller and Mayor John Lindsay regarding plans for Battery Park City. Landfill material from the World Trade Center was used to add land, and a cellular cofferdam was constructed to retain the material. The result was a 700 foot (210 m) extension into the Hudson River, running six blocks or 1,484 feet (450 m). This land was a "gift" to New York City, allowing more tax-generating developments in Battery Park City.

The original estimates put forth by the Port Authority had the costs for construction of the World Trade Center at $350 million—an optimistic figure. In December 1966, the Port Authority announced increased cost estimates, bringing the estimated total to $575 million. This announcement brought criticism of the project from private real estate developers, The New York Times, and others in New York City. The critics charged that the Port Authority figure was an unrealistically low estimate, and they estimated the project would end up costing $750 million. When the World Trade Center twin towers were completed, the total costs to the Port Authority had reached $900 million. The project was financed through tax-exempt bonds issued by the Port Authority.
Report Spam   Logged

Jeannette Latoria
Superhero Member
******
Posts: 5791



« Reply #24 on: September 11, 2007, 01:38:36 pm »

Report Spam   Logged

Jeannette Latoria
Superhero Member
******
Posts: 5791



« Reply #25 on: September 11, 2007, 03:07:43 pm »

Modifications

Over time, numerous structural modifications were made to suit the needs of tenants in the Twin Towers. Modifications were made in accordance with the Port Authority's Tenant Alteration Review Manual and were reviewed by the Port Authority to ensure the changes did not compromise structural integrity of the buildings. In many instances, openings were cut in the floors to accommodate new stairways to connect tenant floors. Some steel beams in the core were reinforced and strengthened to accommodate heavy live loads, such as large amounts of heavy files that tenants had on their floors.

Repairs to structural elements on the lower levels of 1 WTC [North Tower] were made following the 1993 World Trade Center bombing. The greatest damage occurred on levels B1 and B2, with significant structural damage also on level B3. Primary structural columns were not damaged, but secondary steel members experienced some damage. Floors that were blown out needed to be repaired to restore the structural support they provided to columns. The slurry wall was in peril following the bombing and loss of the floor slabs which provided lateral support to counteract pressure from Hudson River water on the other side. The refrigeration plant on sublevel B5, which provided air conditioning to the entire World Trade Center complex, was heavily damaged and replaced with a temporary system for the summer of 1993. The fire alarm system for both towers needed to be replaced, after critical wiring and signaling in the original system was destroyed in the 1993 bombing. Installation of the new system took years to complete, and replacement of some components was still underway at the time of the September 11, 2001 attacks.
Report Spam   Logged

Pages: 1 [2]   Go Up
  Print  
 
Jump to:  

Powered by EzPortal
Bookmark this site! | Upgrade This Forum
SMF For Free - Create your own Forum
Powered by SMF | SMF © 2016, Simple Machines
Privacy Policy